- WhatsApp: / 008613773256419
- Email: Jessy@fillex-packer.com
This series use for 3-10L big container
Bottle volume：3-10L
Cavity:1cavity 2 cavity 3 cavity
Suit for:water bottle,oil bottle,daily product and etc
Items | Unit | MODEL | |||
MaxPET-3C-5L | MAXPET-3E-5L | MAXPET-2E-5L | |||
Molding Spec. | Cavity Pitch | mm | 190 | 228 | 228 |
Preform Heating Pitch | mm | 63.5 | 63.5 | 63.5 | |
No.of Cav. | Cav. | 3 | 3 | 2 | |
Container Spec. | Max.Container Volume | L | 5 | 6 | 6 |
Neck Diameter Range | mm | 39～45 | 39～45 | 39～45 | |
Max.Container Diameter | mm | 180 | 190 | 190 | |
Max.Container Height | mm | 330 | 330 | 330 | |
※※ Theoretical Output | BPH | 3000 | 2600 | 1700 | |
Power Spec. | Rated Power | KW | 96 | 96 | 66 |
Power Consumption | KW | 46 | 46 | 30 | |
Compressor Spec. | Blowing Pressure | Mpa | 2.8～3.2 | 2.6～3.2 | 2.6～3.2 |
Air Consuming | m³/min | 12 | 10 | 6 | |
Main Machine Spec. | Size | mm | 5600×2200 ×2700 | 4800×2130 ×2350 | 4500×2130 ×2350 |
Weight | Kg | 7500 | 6500 | 5500 | |
Extra Large Volume Bottle Blowing Series（3-10L)
Automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving.
Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size.
Each lamp's horizontal position is adjustable to keep the machine flexible.
Adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed.
Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
Full automatic PET Bottle blowing Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪
High response, image high-quality control system, specially support simple USB program upgrade, providing strong guarantee for equipment upgrade, troubleshooting.
The servo motor use SMC cylinder.
Low-pressure control systems match with FESTO and PARKER
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.3percent.
Our Services:
1 year quality warranty and supply spare parts at low cost for life span after sale. We keep the original
drawings of spare parts, so it can match with the rest part of machine.
2. 24 hours/365 days online technical service.
3. Training offered
Q1: Are you a trading company or a manufacturer?
A1: We have our own factory for many years,can give u best service.
Q2: What's your guarantee if we buy your machines?
A2: We offer you high quality machines with 1 year guarantee and free spare parts for 1 year. Meanwhile our engineers have rich experience and have gone to more than 50 countries for installation and commissioning.
Q3: When can I get my machine after I paid?
A3: We will deliver the machines on time as the date we agreed both side.
Q4: How can I install my machine when it arrives?
A4: Our engineer will go to your side as soon as you get your machines ready for testing and teaching your technicians how to run the machines.
Q5: What's the delivery time?
A5: 30-45 days after the T/T deposit or L/C.
Q6: Do you provide customized service?
A6: We can design the machines according to your requirements (material, power, filling type, container and etc), at the same time we will give you professional suggestion by many years industrial experience.
